Dear Sir:

My experience with ENERGY+ began in 1984. My apartment house used N0. 2 fuel oil as the firing fuel for my fuel oil burner. I saved at least 14% on my annual fuel costs, which netted me about $1,450/year.

I went back to my fuel oil consumption figures for the past eight (8) years. During the years from 1980 to 1983 without the use of ENERGY+, I averaged about 13,650 gallons of fuel oil per year. When I compared my fuel oil consumption during 1984 to 1987 with the use of ENERGY+, I found that my averaged fuel oil consumption was only 11,560 gallons per year. This savings in less fuel used amounts to about 2,000 gallons of N0. 2 fuel oil. Based on the average price of $0.875/gallon to homeowners, then my monetary gross savings were $1,750/year. The annual ENERGY+ cost to me was $300.00 Deducting the ENERGY+ cost from my gross savings, netted me an annual savings of $1,450.00

My personal observations when using ENERGY+ are as follows:

1. A much brighter yellow-white flame

2. Cleaner boiler internals (No Soot Buildups).

3. Faster heatup from night time low to day time high operation

My oil delivery personnel have informed me that during the annual boiler cleanup and inspection, my boiler is the cleanest of all the boilers they are required to clean and inspect. The only major boiler problems I faced during this period were mechanical and not related to the quality of the fuel. I have not had any fuel related problems with my fuel oil system since ENERGY+ was used in the treatment of the N0. 2 fuel oil.

ENERGY+ works. I will continue to use ENERGY+ in my N0. 2 fuel oil system because it saves me money and eliminates fuel related processing problems.

Very truly yours,

Peter

Apartment house owner